2024. Sirius Bioresonance software update available!

The software can send the frequencies to the DDS BOX via the USB port. This significantly increases the usable frequency range.

The software can only control the MHS-5200A device!

            

The downloadable software version of the new Sirius bioresonance has been uploaded to the accounts of eligible customers.

In addition, the USB driver of the MHS series DDS box was also uploaded.

If you have modified the software database and created patients, save them before installation!

 

 

2023. The new Bioresonance and Biofeedback software is available.

Instructions for using the Sirius software.

⦁ Installation and registration
⦁ Frequency therapy database
⦁ Frequencies of organs, chakras and homeopathic remedies
⦁ Treatment of patients
⦁ Frequency body analysis (Biofeedback function)
⦁ Settings

Installation and registration

The software installation can be done by running the file Sziriusz_install.msi. The installed software can be launched through the shortcut on the desktop. During the first launch, the software must be registered through the following window. After pressing the " Code Generation" button, the code received must be sent through the form on the website www.rifesoft.com. In the response message, you will receive the registration code which must be entered in the "Enter Registration Code" text box and then press the "Register" button. After that, the software will start in the selected language. The registration process is necessary due to the copy protection.

Main Menu

On this page, you can select the software functions:
⦁ Therapy database
⦁ Generating frequencies
⦁ Patients and therapies
⦁ Body analysis function (Biofeedback)
⦁ Settings
⦁ Exit

Therapies

This page contains the frequency database, which includes Dr. Rife's frequency rows (CAFL database). You can select the therapies from the list by scrolling the table or typing in the search field above. The selected therapy can be chosen by double-clicking on the row. Then the frequencies associated with the therapy will be shown in the list on the right side and the duration of the treatment is shown at the bottom of the page. Then, the treatment can be started by pressing the "Start" button. The right window shows the currently generated frequency and the remaining time of the treatment. When the countdown runs out, the treatment will stop. The database can be edited through the table and additional rows can be added. The modification can be finalized with the "Save Database" button. There is an option to open a database file from other sources, subject to the standard csv file format.

Frequencies

The "Frequencies" page allows for restoring vibrations and generating manually specified frequencies. In the Organs/Chakras/Homeopathic Remedies window, you can select the desired option by selecting the checkboxes or clicking on the table row. The selected image will then be visible. The frequency generation can be started by pressing the "Start" button and will last for the duration specified in the time duration window. In the right side windows, manual frequency input and "sweeping" between two specified frequency values can be performed.

Patients

The "Patients" page is where you can add patients and associate personalized frequency sets with them. You can also open unique frequency files that are created by the program after a biofeedback analysis or from external sources. The file to be opened must be in "csv" format and must have the following structure: (Name; Therapy name; Frequency values;...). The compiled frequency sets can be run one by one or consecutively.

Frequency body analysis (Biofeedback function)

Biofeedback function is only available in the Sirius Biofeedback software version!

Body scan

The software is capable of sending frequencies through the sound card output into the body, which is then evaluated through the sound card input. For this, one electrode each must be connected to the sound card connectors (one to the headphone output and the other to the microphone input), which are then placed on the body. The frequency patterns use the current frequency database. After mapping, the program passes the received data for evaluation or can be saved to a file for later processing.

Analysis

The software evaluates the frequencies received from the body through the sound card and ranks them based on frequency occurrence and changes. The results are displayed in a table that shows which therapy contains the frequency with the most changes. The table also shows a frequency rate and a relevance value. The frequency rate shows how many frequencies showed differences in the obtained therapy. The relevance value ranges from 1 to 10, based on the number of frequencies used in the therapy, with 10 being the highest value if only one frequency is used and 0 if more than 10 frequencies are used.

 

Creating a personalized frequency list

The right-side column of the analysis table contains checkboxes. The frequency values can be found in the column before the checkboxes. By selecting the checkboxes, we can select the frequencies that we want to use to create a unique frequency pattern. By pressing the "Add" button, the frequency pattern will immediately be added to the selected patient's therapy. By pressing the "Save" button, a therapy file will be created, which can be forwarded to another Sirius software or later loaded into our own patients' therapies.

Settings

On the settings page, we can adjust the output waveform of the frequency generation. We can specify how the measured values are sorted before evaluation based on what parameters. By default, it is sorted from highest to lowest signal strength. During evaluation, all frequencies are evaluated and added to the table regardless of relevance, so it is necessary to specify how many values listed in the table should be considered during analysis, usually 10-30 percent of all rows obtained during evaluation. We can search for a therapy by specifying a frequency. We can change the language, and the language of the therapy database will also change.

Software features:

⦁ Dr. Rife (CAFL) database (in Hungarian, English, and German).
⦁ Organ frequencies.
⦁ Chakra, energy center frequencies.
⦁ Homeopathic remedies database.
⦁ Manual frequency input option.
⦁ Sweep function for generating frequencies between two specified values.
⦁ Patient record-keeping, personalized frequency sequences can be assembled.
⦁ Editable database.
⦁ Ability to load therapy database and patient frequency files from other sources (in "csv" format).
⦁ Frequency waveforms: Sine, Square, Triangle, Sawtooth.
⦁ Frequency range: 1-20,000 Hertz.
⦁ Available languages during installation: Hungarian, English, and German.

The software license is valid for one computer and the code remains unchanged in case of a system re-installation or hard drive change.

Warning!

The software is not considered a medical device!
Not suitable for diagnosis!
The Sirius software was specifically designed for experimentation!
Anyone can use the software at their own risk!